Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) >> Removal And Installation >> Yaw Rate/Side/DECEL G Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION:

Never drop or strike yaw rate/side/decel G sensor, because it has little endurance to impact. Never use a pneumatic tool.

  1. Remove console finisher assembly. Refer to REMOVAL AND INSTALLATION .
  2. Disconnect yaw rate/side/decel G sensor harness connector.
  3. Remove yaw rate/side/decel G sensor.
scientia non olet · About Mike's Workshop Manuals