DIAG TROUBLE CODE [PXXXX] |
- The engine control component part/control system has a trouble code that is displayed as PXXXX. (Refer to DTC INDEX
.)
|
| FUEL SYS-B1 |
- "Fuel injection system status" at the moment a malfunction is detected is displayed.
- One of the following mode is displayed.
Mode 2: Open loop due to detected system malfunction
Mode 3: Open loop due to driving conditions (power enrichment, deceleration enleanment)
Mode 4: Closed loop - using oxygen sensor (s) as feedback for fuel control
Mode 5: Open loop - has not yet satisfied condition to go to closed loop
|
| FUEL SYS-B2 |
- Always a certain value is displayed.
- This item is not efficient for this models.
|
| COMBUST CONDITION |
- Always a certain value is displayed.
- This item is not efficient for this models.
|
| CAL/LD VALUE [%] |
- The calculated load value at the moment a malfunction is detected is displayed.
|
| COOLANT TEMP [°C] or [°F] |
- The engine coolant temperature at the moment a malfunction is detected is displayed.
|
| L-FUEL TRM-B1 [%] |
- "Long-term fuel trim" at the moment a malfunction is detected is displayed.
- The long-term fuel trim indicates much more gradual feedback compensation to the base fuel schedule than short-term fuel trim.
|
| L-FUEL TRM-B2 [%] |
- Always a certain value is displayed.
- This item is not efficient for this models.
|
| S-FUEL TRM-B1 [%] |
- "Short-term fuel trim" at the moment a malfunction is detected is displayed.
- The short-term fuel trim indicates dynamic or instantaneous feedback compensation to the base fuel schedule.
|
| S-FUEL TRM-B2 [%] |
- Always a certain value is displayed.
- This item is not efficient for this models.
|
| ENGINE SPEED [RPM] |
- The engine speed at the moment a malfunction is detected is displayed
|
VEHICL SPEED [km/h] or [mph] |
- The vehicle speed at the moment a malfunction is detected is displayed
|
| INT MANI PRES [kPa] |
- Always a certain value is displayed.
- This item is not efficient for this models.
|
| ABSOL TH•P/S [%] |
- The throttle valve opening angle at the moment a malfunction is detected is displayed
|
| B/FUEL SCHDL [msec] |
- The base fuel schedule at the moment a malfunction is detected is displayed
|
| INT/A TEMP SE [°C] or [°F] |
- The intake air temperature at the moment a malfunction is detected is displayed
|
| BATTERY VOLTAGE [V] |
The battery voltage at the moment a malfunction is detected is displayed. |
| FUEL LEVEL [%] |
The fuel level at the moment a malfunction is detected is displayed. |
| FUEL PRESSURE [MPa] |
The fuel pressure at the moment a malfunction is detected is displayed. |
| TARGET FUEL PRESS [MPa] |
The target fuel pressure at the moment a malfunction is detected is displayed. |