Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> QX60 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Driver Assistance System (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1B20: Control Module >> Driver Assistance Buzzer Control Module >> Component Inspection

Component Inspection

  1. CHECK WARNING BUZZER

    1. Turn ignition switch OFF.
    2. Disconnect warning buzzer connector.
    3. Check resistance between warning buzzer terminals.
    Terminal Resistance
    1 2 Approx. 6 Ω

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace warning buzzer. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About Mike's Workshop Manuals