Starter Motor
WARNING: This page is about a different variant/trim than selected.
| Applied model | VR30DDTT | |||
| Type | Except direct adaptive steering models | Direct adaptive steering models | ||
| S114-932 | S114-967 | |||
| HITACHI make | ||||
| Reduction gear type | ||||
| System voltage | [V] | 12 | ||
| No-load | Terminal voltage | [V] | 11 | |
| Current | [A] | Less than 110 | ||
| Revolution | [RPM] | More than 2, 700 | ||
| Minimum diameter of commutator | [mm (in) ] | 28.0 (1.102) | ||
| Minimum length of brush | [mm (in) ] | 10.5 (0.413) | ||
| Brush spring tension | [N (kg, lb) ] | 16.2 (1.65, 3.6) | ||
| Clearance between bearing metal and armature shaft | [mm (in) ] | Less than 0.2 (0.008) | ||
| Clearance "L" between pinion front edge and pinion stopper | [mm (in) ] | 0.3 - 2.5 (0.012 - 0.098) | ||