Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Final Drive >> Unit Disassembly And Assembly >> Side Shaft >> Disassembly And Assembly >> Assembly

Disassembly And Assembly: Assembly

  1. Using the drift (A) [SST: KV38100200 (-)], install side shaft oil seal.
    G04076293Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Never reuse oil seal.
    • When installing, never incline oil seal.
    • Apply multi-purpose grease onto oil seal lips, and gear oil onto the circumference of oil seal.
  2. Install dust seal.
  3. Support side shaft bearing with the drift (A) [SST: ST30032000 (J-26010-01)], then press side shaft WHITE-1 into the side shaft bearing together with extension retainer using a press.
    G04076294Courtesy of NISSAN NORTH AMERICA, INC.
  4. Apply multi-purpose grease to O-Ring, and install it to extension tube retainer.
    CAUTION:

    Never reuse O-Ring.

scientia non olet · About Mike's Workshop Manuals