Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q60 Base, AWD >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Final Drive >> Unit Disassembly And Assembly >> Differential Assembly >> Adjustment >> Backlash

Differential Assembly: Adjustment: Backlash

  1. Remove carrier cover. Refer to DISASSEMBLY AND ASSEMBLY .
  2. Fit a dial indicator to the drive gear face to measure the backlash.
    G04076235Courtesy of NISSAN NORTH AMERICA, INC.
    Backlash : Refer to BACKLASH .
    • If the backlash is outside of the specified value, change the thickness of side bearing adjusting washer.
      When the backlash is large:
        Decrease side bearing adjusting washer thickness. For selecting adjusting washer, refer to the latest parts information.
      When the backlash is small:
        Increase side bearing adjusting washer thickness. For selecting adjusting washer, refer to the latest parts information.
scientia non olet · About Mike's Workshop Manuals