Camera Image Operation Principle
- If the information writing to Around View Monitor Control Unit and the information from the camera are not matched, the applicable camera position is indicated as an error on the Birds - Eye view display. (Calibration operation is necessary when replacing each camera or when replacing Around View Monitor Control Unit.)
- Around View Monitor Control Unit receives the camera switch signal from display Control Unit via AV communication by pressing the "CAMERA" switch of multifunction switch.
- Around View Monitor Control Unit that receives the camera switch signal supplies the power to each camera and inputs the camera image from each camera.
- When the selector lever is in the reverse position, Around View Monitor Control Unit receives the reverse signal, supplies the power to each camera, and inputs the camera image from each camera.
- Around View Monitor Control Unit that receives the camera image signal from each camera cuts out the required screen for each view, superimposes the camera image, vehicle icon, guiding lines, sonar indicator, "MOD" icon, and outputs them to the display unit.