Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 632 (Driver Assistance System (Service Information)) >> Removal And Installation >> Chassis Control Module >> CHASSIS CONTROL MODULE : Removal & Installation >> Removal

CHASSIS CONTROL MODULE : Removal & Installation: Removal

WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: When replacing chassis control module, configuration of chassis control module is required. Refer to Work Procedure .
NOTE: If the chassis control module is replaced, user registration information is erased, and all setting items for Infiniti InTuition related parts are erased.
  1. Remove the parking brake pedal assembly. Refer to PARKING BRAKE CONTROL : Removal & Installation .
  2. Separate the harness connector SYMBOL .
    GNSJSOIA0883Z-883Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove the chassis control module.
    CAUTION: Never drop the chassis control module.
scientia non olet · About Mike's Workshop Manuals