Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 625 (Steering Control System (Diagnostics)) >> Basic Inspection >> Direct Adaptive Steering >> Additional Service When Removing 12 V Battery Negative Terminal >> Work Procedure >> Direct Adaptive Steering System

Direct Adaptive Steering System

WARNING: This page is about a different car, the 2020 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

When removing the 12 V battery negative terminal, initialize is required for operating the direct adaptive steering normally.

  1. DIRECT ADAPTIVE STEERING INITIALIZE 
    1. Set the steering wheel to the straight-ahead position.
    2. Connect 12 V battery terminal.
    3. Start the engine.
      CAUTION: Never drive the vehicle.
    4. Turn the steering wheel from full left stop to full right stop.
    5. Confirm the condition of turning the steering wheel is normal.

    WORK END

scientia non olet · About Mike's Workshop Manuals