Component Function Check
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK FUNCTION
- Select "INTELLIGENT KEY" of "BCM" using CONSULT.
- Select "PUSH SW" in "Data Monitor" mode.
- Check the push-button ignition switch signal under the following conditions.
Test item
Condition
Status
PUSH SW
Push-button ignition switch is pressed
ON
Push-button ignition switch is not pressed
OFF
Is the indication normal?
YES
INSPECTION END.
NO
Refer to Diagnosis Procedure .