Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 443 (Around View Monitor System (2 Of 2)) >> Ecu Diagnosis Information >> Around View Monitor Control Unit >> DTC Inspection Priority Chart

DTC Inspection Priority Chart

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

If multiple DTCs are detected simultaneously, check them one by one depending on the following DTC inspection priority chart.

Priority

Detected items (DTC)

1

U1305: CONFIG UNFINISH

2

  • U1000: CAN COMM CIRCUIT
  • U1010: CONTROL UNIT (CAN)

3

  • U0428: ST ANGLE SENSOR CALIBRATION
  • U111A: REAR CAMERA IMAGE SIGNAL
  • U111B: SIDE CAMERA RH IMAGE SIGNAL
  • U111C: FRONT CAMERA IMAGE SIGNAL
  • U111D: SIDE CAMERA LH IMAGE SIGNAL
  • U1232: ST ANGLE SEN CALIB
  • U1302: CAMERA POWER VOLT
  • U1303: LED POWER SUPPLY VOLT
  • U1304: CAMERA IMAGE CALIB