Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 418 (Power Distribution System) >> Removal And Installation >> Push-Button Ignition Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage cluster lid A fixing pawls. Refer to Removal and Installation .
  2. Disconnect push-button ignition switch connector and NATS antenna amp. connector.
  3. Disengage NATS antenna amp. fixing pawls and then remove NATS antenna amp. SYMBOL and push-button ignition switch SYMBOL as a set from cluster lid A SYMBOL .
    GNSJMMIA1461Z-461Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
  4. Disengage push-button ignition switch fixing pawl and then remove push-button ignition switch SYMBOL from NATS antenna amp. SYMBOL .
    GNSJMMIA1435Z-435Courtesy of NISSAN NORTH AMERICA, INC.

    SYMBOL

    : Pawl
scientia non olet · About Mike's Workshop Manuals