DAST Calibration (Mode2): Description
WARNING: This page is about a different car, the 2019 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
"DAST CALIBRATION (MODE2)" is a function to calculate an off-center of the steering rack after adjust toe-in without using the alignment tester.
Off-center
is calculated by the difference between a neutral position of the vehicle's alignment
and the neutral position of the steering rack
. Refer to Work Procedure .
CAUTION:
When adjusting toe-in without using the alignment tester, always perform "DAST CALIBRATION (MODE2) ".
: Vehicle front