Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2016 >> QX80 Base, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Driver Assistance System (DTC/Circuit Diagnosis) >> Circuit Diagnosis >> DTC C1B20: Control Module >> Driver Assistance Buzzer Control Module >> Component Inspection

Component Inspection

  1. CHECK DRIVER ASSISTANCE BUZZER

    1. Turn ignition switch OFF.
    2. Disconnect driver assistance buzzer connector.
    3. Check resistance between driver assistance buzzer terminals.
    Terminal Resistance
    1 2 Approx. 6 Ω

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace driver assistance buzzer.

scientia non olet · About Mike's Workshop Manuals