Back-Up Collision Intervention System Operation Description
WARNING: This page is about a different variant/trim than selected.
- ADAS control unit enables Back-up Collision Intervention system.
- The BCI system is automatically turned ON every time the engine is started.
- Side radar detects a vehicle approaching, and transmits the vehicle detection signal to ADAS control unit via ITS communication.
- Side radar receives vehicle speed signal from ADAS control unit and changes its detecting function.
- ADAS control unit starts the control as follows, based on a vehicle detection signal.
OPERATION CONDITION OF BACK-UP COLLISION INTERVENTION SYSTEM
ADAS control unit performs the control when the following conditions are satisfied.
- Back-up Collision Intervention: ON (Selected by integral switch)
- When the vehicle is moving in reverse at 8 km/h (5 MPH) or less.
NOTE:
- When the Back-up Collision Intervention system setting is ON in the integral switch.
- Setting of BCI is performed in synchronization with the log-in function of on-board personal assistant. For details of the log-in function, refer to SYSTEM DESCRIPTION .