Consult Function: Function
WARNING: This page is about a different variant/trim than selected.
| Diagnosis test mode | Function |
|---|---|
| Self diagnosis Result | Can quickly read and erase the 1st trip DTC, 1st trip DTC freeze frame data, or freeze frame data or other self diagnosis results. * |
| Data Monitor | HPCM input or output data can be read. |
| Work support | Quick and precise adjustment for components and systems can be performed according to CONSULT display. |
| Active Test | CONSULT activates actuator via HPCM, or can perform operation within the specified area that is indicated by partial command value. |
| ECU identification | HPCM part can be read. |
| DTC Work Support | The status of system monitoring tests and self-diagnosis status/results can be confirmed. |
* : When HPCM memory is erased, the following diagnosis information is erased.
- Diagnostic trouble codes
- 1st trip diagnostic trouble codes
- Freeze frame data
- 1st trip DTC freeze frame data
- Restart-prohibit fail-safe modeCAUTION:
If restart-prohibit fail-safe mode is repeatedly canceled by CONSULT "ERASE DTC" and then restarted, the Li-ion battery level declines to zero and start becomes impossible. If the Li-ion battery level declines to zero, it is necessary to charge or replace all of the Li-ion batteries .