When A DTC Is Not Stored In Control Module
WARNING: This page is about a different variant/trim than selected.
The erasing method depends on a permanent DTC stored in control module. Refer to the following table.
NOTE:
If the applicable permanent DTC includes multiple groups, perform the procedure of Group B first. If the permanent DTC is not erased, perform the procedure of Group A.
: Applicable : Not applicable
| Group* | Perform "DTC CONFIRMATION PROCEDURE" for applicable DTCs. | Driving pattern | Reference | |
|---|---|---|---|---|
| B | D | |||
| A | * | - | - | WORK PROCEDURE (GROUP A) |
| B | - | * | * | WORK PROCEDURE (GROUP B) |
* : For group, refer to "DTC Index" of each control module.