Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2016 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Hybrid Control System (Introduction) (Hybrid)) >> Basic Inspection >> Additional Service When Replacing HPCM >> Work Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

  1. PERFORM INITIALIZATION OF NATS SYSTEM AND REGISTRATION OF ALL NATS IGNITION KEY IDS

    Perform initialization of NATS system and registration of all NATS ignition key IDs.

    Refer to DESCRIPTION .

    GO TO STEP 2  .

  2. PERFORM ACCELERATOR PEDAL RELEASED POSITION LEARNING

    Perform "Accelerator Pedal Released Position Learning".

    Refer to DESCRIPTION .

    GO TO STEP 3. 

  3. PERFORM CLUTCH 1 POSITION LEARNING

    Perform "Clutch 1 position learning".

    Refer to DESCRIPTION .

    END