Physical Values
WARNING: This page is about a different car, the 2017 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
| Terminal No. (Wire color) |
Description | Condition | Standard value | Reference value | |||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 1 (L) |
- | CAN - H | - | - | - | - | |
| 2 (R) |
CAN - L | - | - | - | - | ||
| 5 (B) |
Ground | Ground | - | Ignition switch ON | 0 - 0.1 V | Approx. 0 V | |
| 6 (L) |
- | ITS communication - H | - | - | - | - | |
| 7 (Y) |
ITS communication - L | - | - | - | - | ||
| 8 (L) |
Chassis communication - H | - | - | - | - | ||
| 9 (R) |
Chassis communication - L | - | - | - | - | ||
| 12 (GR)* 1 (G)* 2 |
5 (B) |
Ignition power supply | Input | Ignition switch ON | - | 10 - 16 V | Battery voltage |
| 17 (V) |
ICC brake hold relay drive signal | Output | Ignition switch ON | - | 10 - 16 V | Approx. 12 V | |
| At "STOP LAMP" test of "Active test" | 0 - 0.1 V | Approx. 0 V | |||||
| 23 (Y) |
ICC/ASCD steering switch signal ground | - | Ignition switch ON | 0 - 0.1 V | Approx. 0 V | ||
| 24* 3 (SB) |
23* 3 (Y) |
ICC steering switch signal | Input | Ignition switch ON | ICC steering switch: OFF | 4.1 - 4.3 V | Approx. 4.3 V |
| CANCEL switch: Pressed | 1.1 - 1.6 | Approx. 1.3 V | |||||
| RESUME/ACCELERATE switch: Pressed | 3.5 - 3.7 V | Approx. 3.7 V | |||||
| SET/COAST switch: Pressed | 2.8 - 3.1 V | Approx. 3.0 V | |||||
| DISTANCE switch: Pressed | 2.0 - 2.4 V | Approx. 2.2 V | |||||
| 24* 4 (SB) |
23* 4 (Y) |
ASCD steering switch signal | Input | Ignition switch ON | ASCD steering switch: OFF | 3.8 - 4.3 V | Approx. 4.0 V |
| CANCEL switch: Pressed | 0.8 - 1.3 V | Approx. 1.0 V | |||||
| SET/COAST switch: Pressed | 1.8 - 2.2 V | Approx. 2.0 V | |||||
| RESUME/ACCELERATE switch: Pressed | 2.8 - 3.1 V | Approx. 3.0 V | |||||
NOTE:
* 1: VR30DDTT
* 2: 2.0 TURBO GASOLINE ENGINE
* 3: Used only in with ICC.
* 4: Used only in without ICC.