Diagnostic Test
- CHECK FUEL PUMP CONTROL MODULE (FPCM)
- Check the voltage between FPCM terminals under the following conditions.
FPCM Condition Voltage Connector + - Terminal Terminal B41 7 6 For 1 second after turning ignition switch ON Approx. 8.5 V More than 1 second after turning ignition switch ON Approx. 0 V Idle speed Approx. 8.5 V
Is the inspection result normal?
YES
INSPECTION END
NO
Replace FPCM.
- Check the voltage between FPCM terminals under the following conditions.