Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (With VDC) >> DTC/Circuit Diagnosis >> DTC C1170: Variant Coding >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO STEP 2  .

  2. CHECK DTC DETECTION

    G-20 With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform self-diagnosis for "ABS".

    Is DTC "C1170" detected?

    YES 

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals