Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect front power window motor (passenger side) connector.
3. Turn ignition switch ON.
4. Check voltage between front power window motor (passenger side) harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Front power window motor (passenger side)
   Connector	Terminal
   D27	3	Ground	Front power window switch (passenger side)	UP	12
   				DOWN	0
   	1			UP	0
   				DOWN	12

Is the inspection result normal?

YES 

Replace front power window motor (passenger side). Refer to REMOVAL AND INSTALLATION .

NO 

GO TO STEP 2  .

1. Turn ignition switch OFF.
2. Disconnect front power window switch (passenger side) connector.
3. Check continuity between front power window switch (passenger side) harness connector and front power window motor (passenger side) harness connector.

   Front power window switch (passenger side)		Front power window motor (passenger side)		Continuity
   Connector	Terminal	Connector	Terminal
   D25	8	D27	3	Existed
   	9		1

4. Check continuity between front power window switch (passenger side) connector and ground.

   Front power window switch (passenger side)		Ground	Continuity
   Connector	Terminal
   D25	8		Not existed
   	9

Is the inspection result normal?

YES 

Replace front power window switch (passenger side). Refer to REMOVAL AND INSTALLATION .

NO 

Repair or replace harness.