Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX70 AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security Control System >> DTC/Circuit Diagnosis >> DTC B210D: Starter Relay >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B210D is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B210D is displayed with DTC B2617, first perform the trouble diagnosis for DTC B2617. Refer to DTC LOGIC .
DTC No. Trouble Diagnosis Name DTC Detecting Condition Possible Cause
B210D STARTER RLY ON CIRC IPDM E/R detects that the relay is stuck in the ON position even if the followings condition are met for about 1 second.
  • Starter control relay ON/OFF signal from BCM
  • Transmission range switch input
  • Harness or connectors

    (The CAN communication line is open or shorted.)

  • IPDM E/R