Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Power Control System (Power Distribution System) (Hybrid)) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Inspection >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK PUSH-BUTTON IGNITION SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect push-button ignition switch connector.
    3. Check continuity between push-button ignition switch terminals.
      Push-button ignition switch Condition Continuity
      Terminal
      4 1 Pressed Existed
      Not pressed Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace push-button ignition switch.

scientia non olet · About Mike's Workshop Manuals