Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2015 >> QX50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Driver Assistance System (ADAS Control Unit) (Introduction) (Hybrid)) >> ADAS Control Unit >> System Description >> System >> Fail-Safe (ADAS Control Unit)

Fail-Safe (ADAS Control Unit)

WARNING: This page is about a different car, the 2015 Infiniti Q70. However, it is still accessible from the selected car via links, so may be relevant.

If a malfunction occurs in each system, ADAS control unit cancels each control, sounds a beep, and turns ON the warning or indicator lamp.

System Buzzer Warning lamp/Indicator lamp Description
Vehicle-to-vehicle distance control mode High-pitched tone ICC system warning lamp Cancel
Forward Emergency Braking (FEB) High-pitched tone FEB warning lamp Cancel
Predictive Forward Collision Warning (PFCW) High-pitched tone FEB warning lamp Cancel
Distance Control Assist (DCA) High-pitched tone ICC system warning lamp Cancel
Lane Departure Warning (LDW) - Lane departure warning lamp Cancel
Lane Departure Prevention (LDP) Low-pitched tone Lane departure warning lamp Cancel
Blind Spot Warning (BSW) - Blind Spot Warning/Blind spot Intervention warning lamp Cancel
Blind Spot Intervention Low-pitched tone Blind Spot Warning/Blind spot Intervention warning lamp Cancel
Back-up Collision Intervention (BCI) High-pitched tone BCI malfunction indicator Cancel
Active trace control function - FEB warning lamp
  • Cancel
  • If a communication error occurs between the A/C auto amp. and CAN communication line, a mode at the instant of error occurrence is maintained until the mode is fixed to STANDARD after turning the ignition switch from OFF to ON
scientia non olet · About Mike's Workshop Manuals