Inspection Mode 5

WITH CONSULT:

1. Turn ignition switch OFF.
2. Select "INSPECTION MODE 5" in "ACTIVE TEST" mode of "EV/HEV".
3. Touch "ON".
4. The system changes to inspection mode 5, and the hybrid system warning lamp on the combination meter blinks.
5. Set the vehicle to READY.

WITHOUT CONSULT:

1. Perform the following steps within 60 seconds.
   1. Turn ignition switch ON with the selector lever at the P position.
   2. Fully depress the accelerator pedal, then fully release it 6 times.
   3. While depressing the brake pedal, shift the select lever to the N position.
   4. Fully depress the accelerator pedal, then fully release it 6 times.
   5. While depressing the brake pedal, shift the select lever to the P position.
   6. Fully depress the accelerator pedal, then fully release it 6 times.
2. The system changes to inspection mode 5, and the hybrid system warning lamp on the combination meter blinks.
3. Set the vehicle to READY.

END