Physical Values
| Terminal No. (Wire color) |
Description | Condition | Standard value | Reference value | |||
|---|---|---|---|---|---|---|---|
| + | - | Signal name | Input/Output | ||||
| 1 (L) |
- | CAN - H | - | - | - | - | |
| 2 (R) |
CAN - L | - | - | - | - | ||
| 5 (B) |
Ground | Ground | - | Ignition switch ON | 0 - 0.1 V | Approx. 0 V | |
| 6 (L) |
- | ITS communication - H | - | - | - | - | |
| 7 (P) |
ITS communication - L | - | - | - | - | ||
| 8 (L) |
Chassis communication - H | - | - | - | - | ||
| 9 (R) |
Chassis communication - L | - | - | - | - | ||
| 12 (GR) |
5 (B) |
Ignition power supply | Input | Ignition switch ON | - | 10 - 16 V | Battery voltage |
| 17 (V) |
ICC brake hold relay drive signal | Output | Ignition switch ON | - | 10 - 16 V | Approx. 12 V | |
| At "STOP LAMP" test of "Active test" | 0 - 0.1 V | Approx. 0 V | |||||