Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2014 >> QX60 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Power Window Control System (Except Hybrid)) >> DTC/Circuit Diagnosis >> Door Key Cylinder Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti QX60. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select DOOR LOCK of BCM using CONSULT.
    2. Select KEY CYL LK-SW, KEY CYL UN-SW in DATA MONITOR mode.
    3. Check that the function operates normally according to the following conditions.
    Monitor item Condition Status
    KEY CYL LK-SW Driver side door key cylinder Lock ON
    Neutral / Unlock OFF
    KEY CYL UN-SW Unlock ON
    Neutral / Lock OFF

    Is the inspection result normal?

    YES 

    Door key cylinder switch is OK.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About Mike's Workshop Manuals