Component Function Check

Turn ignition switch to START.

Are any cylinders ignited? 

YES: GO TO  2.

NO: Proceed to "DIAGNOSIS PROCEDURE ".

With CONSULT 

1. Start engine.
2. Perform "POWER BALANCE" in "ACTIVE TEST" mode with CONSULT.
3. Check that each circuit produces a momentary engine speed drop.

Without CONSULT 

1. Start engine.
2. Listen to each fuel injector operating sound.

Clicking sound should be heard. 

Fig 1: Checking Fuel Injector Function Using Tool

Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal? 

YES: INSPECTION END

NO: Proceed to "DIAGNOSIS PROCEDURE ".