Component Function Check

With CONSULT

1. Turn ignition switch ON.
2. Select "ASCD BRAKE SW" in "DATA MONITOR" mode of "EV/HEV" using CONSULT.
3. Check that monitor indication as per the following condition.

   Monitor item	Condition		Indication
   ASCD BRAKE SW	Brake pedal	Slightly depressed	OFF
   		Fully released	ON

Without CONSULT

1. Turn ignition switch ON.
2. Check the Voltage HPCM harness connector terminals as per the following condition.

   +		-	Condition		Voltage (Approx.)
   HPCM
   Connector	Terminal
   B159	59	Ground	Brake pedal	Slightly depressed	0 V
   				Fully released	Battery Voltage

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Proceed to "DIAGNOSIS PROCEDURE ".