Mike's Workshop Manuals: Service manuals for every vehicle

Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission (Convertible) >> Unit Disassembly And Assembly >> Shift Fork And Fork Rod >> Disassembly >> Check Shift Pin

Check Shift Pin

Set the control bracket to a vise and then remove check shift pin (1) from control bracket.

Fig 1: Installing Check Shift Pin To Control Bracket

G05973300

Courtesy of NISSAN NORTH AMERICA, INC.

scientia non olet · About Mike's Workshop Manuals