Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2014 >> Q60 Base, 2D Convertible, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Transmission (Convertible) >> Service Data And Specifications (SDS) >> Service Data And Specifications (SDS) >> Shift Fork

Shift Fork

Unit: mm (in)
Measurement point One-side wear specification Sliding width of new part
G04889044
 1st-2nd 0.2 (0.008) 7.80 - 7.93 (0.3071 - 0.3122)
3rd-4th 0.2 (0.008) 7.80 - 7.93 (0.3071 - 0.3122)
5th-6th 0.2 (0.008) 7.80 - 7.93 (0.3071 - 0.3122)
Reverse 0.2 (0.008) 7.80 - 7.93 (0.3071 - 0.3122)
scientia non olet · About Mike's Workshop Manuals