Work Procedure
- SAVING VEHICLE SPECIFICATION
WITH CONSULT
Perform "READ CONFIGURATION" to save or print current vehicle specification.
Is vehicle specification saved normally?
YES: GO TO 2.
NO: GO TO 4.
- REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to "REMOVAL AND INSTALLATION ".
: GO TO 3.
- WRITING VEHICLE SPECIFICATION
WITH CONSULT
Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.
: GO TO 6.
- REPLACE ADAS CONTROL UNIT
Replace ADAS control unit. Refer to "REMOVAL AND INSTALLATION ".
: GO TO 5.
- WRITING VEHICLE SPECIFICATION
WITH CONSULT
Select "WRITE CONFIGURATION - Manual selection" and write in the following list at a ADAS control unit depending on a vehicle specification.
Setting item Items Setting value POWER TRAIN NISSAN NISSAN HEV 2WD/4WD 2WD 4WD CAMERA CONTROL UNIT WITHOUT WITH BRAKE TYPE(1) NORMAL SPORT -
(1) NORMAL: Front brake 2 piston type - SPORT: Front brake 4 piston type
: GO TO 6.
-
- OPERATION CHECK
Confirm that each function controlled by ADAS control unit operates normally.
: WORK END