Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 359 (Engine Control System - Component Testing (Except CROSSCABRIOLET)) >> Fuel Injector >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2013 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK FUEL INJECTOR 
    1. Turn ignition switch OFF.
    2. Disconnect fuel injector harness connector.
    3. Check resistance between fuel injector terminals as per the following.
      Terminals Resistance
      1 and 2 11.1 - 14.5 Ω [at 10 - 60°C (50 - 140°F)]

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace malfunctioning fuel injector. Refer to "EXPLODED VIEW ".

      Fig 1: Checking Resistance Between Fuel Injector Connector Terminals
      G08955381Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals