Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> QX56 AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0159 >> DTC/Circuit Diagnosis >> DTC P0125: ECT Sensor >> Component Inspection (Engine Coolant Temperature Sensor)

Component Inspection (Engine Coolant Temperature Sensor)

  1. CHECK ENGINE COOLANT TEMPERATURE SENSOR 
    1. Turn ignition switch OFF.
    2. Disconnect engine coolant temperature sensor harness connector.
    3. Remove engine coolant temperature sensor.
    4. Check resistance between engine coolant temperature sensor terminals by heating with hot water as shown in the figure below.
      Terminals Condition Resistance (kΩ)
      1 and 2 Temperature [°C (°F)] 20 (68) 2.35 - 2.73
      50 (122) 0.68 - 1.00
      90 (194) 0.236 - 0.260
      Fig 1: Checking Engine Coolant Temperature Sensor
      G08855369Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace engine coolant temperature sensor. Refer to "EXPLODED VIEW ".