Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> M56 Base >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> DTC/Circuit Diagnosis >> DTC B2616: Ignition Relay Circuit >> Component Inspection

Component Inspection

  1. CHECK IGNITION RELAY 
    1. Turn ignition switch OFF.
    2. Remove ignition relay.
    3. Check the continuity between ignition relay terminals.
      Terminals Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace Ignition relay

      Fig 1: Identifying Relay Terminals
      G07129475Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals