OPEN/CLOSE SWITCH: Component Inspection

CHECK OPEN/CLOSE SWITCH

Turn ignition switch OFF.
Disconnect power window main switch (door mirror remote control switch) connector.

Check continuity between power window main switch (door mirror remote control switch) terminals.

[DRIVER SIDE]

Power window main switch (door mirror remote control switch)		Condition		Continuity
Terminal		Condition		Continuity
22	17	Open/close switch	OPEN	Existed
7	20		OPEN
22	20		CLOSE
7	17		CLOSE

[PASSENGER SIDE]

Power window main switch (door mirror remote control switch)		Condition		Continuity
Terminal		Condition		Continuity
22	18	Open/close switch	OPEN	Existed
7	21		OPEN
22	21		CLOSE
7	18		CLOSE

Is the inspection result normal?

YES: INSPECTION END

NO: Replace power window main switch (door mirror remote control switch). Refer to "FRONT DOOR FINISHER: REMOVAL AND INSTALLATION ".