Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> M35h >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Steering Control System (Hybrid EPS System)) >> DTC/Circuit Diagnosis >> DTC C1607, C1608: Power Steering Control Module >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2012 Infiniti M35h. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE

    ◦ With CONSULT 

    1. Set the vehicle to READY state or start the engine.
    2. Perform "EPS" self-diagnosis.

    Is DTC "C1607" or "C1608" detected? 

    YES: Proceed to diagnosis procedure. Refer to "Diagnosis Procedure ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals