Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> JX35 AWD >> Repair and Diagnosis >> Steering >> Power Steering >> Steering Control System >> DTC/Circuit Diagnosis >> DTC C160A: Heat Protection >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    : GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT 

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS" self-diagnosis.

      Is DTC "C160A" detected? 

      YES: Go to "WORK FLOW ".

      NO: Inspection End.

scientia non olet · About Mike's Workshop Manuals