Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> JX35 AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> DTC/Circuit Diagnosis >> DTC B26F2: Ignition Relay >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM SELF DIAGNOSTIC RESULT 
    1. Turn ignition switch ON under the following conditions, and wait for 2 seconds or more.
      • CVT selector lever is in the P (park) or N (neutral) position.
      • Do not depress brake pedal.
    2. Perform self diagnostic result.

      Is DTC B26F2 detected? 

      YES: Go to "DIAGNOSIS PROCEDURE ".

      NO: Inspection End.

scientia non olet · About Mike's Workshop Manuals