DRIVER SIDE: Diagnosis Procedure

Regarding Wiring Diagram information, refer to "WIRING DIAGRAM ".

1. CHECK FRONT POWER WINDOW MOTOR INPUT SIGNAL 
   1. Turn ignition switch OFF.
   2. Disconnect front power window motor LH connector.
   3. Turn ignition switch ON.
   4. Check voltage between front power window motor LH harness connector and ground.

      (+)		(-)	Condition		Voltage (Approx.)
      Front power window motor LH
      Connector	Terminal
      D9	1	Ground	Power window main switch	UP	12
      				DOWN	0
      	2			UP	0
      				DOWN	12

      Is the inspection result normal? 

      YES: Replace front power window motor LH. Refer to "REMOVAL AND INSTALLATION - FRONT POWER WINDOW MOTOR ".

      NO: GO TO 2.

2. CHECK POWER WINDOW MOTOR CIRCUIT 
   1. Turn ignition switch OFF.
   2. Disconnect power window main switch connector.
   3. Check continuity between power window main switch harness connector and front power window motor LH harness connector.

      Power window main switch		Front power window motor LH		Continuity
      Connector	Terminal	Connector	Terminal
      D56	6	D9	1	Yes
      	5		2

   4. Check continuity between power window main switch harness connector and ground.

      Power window main switch		Ground	Continuity
      Connector	Terminal
      D56	6		No
      	5

      Is the inspection result normal? 

      YES: Replace power window main switch. Refer to "REMOVAL AND INSTALLATION ".

      NO: Repair or replace harness.