Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> FX37 Base, AWD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Suspension Control System >> DTC/Circuit Diagnosis >> DTC C1D03: Steering Angle Sensor >> DTC Logic >> DTC Reproduction Procedure

DTC Reproduction Procedure

CAUTION: If the CAN signal "Unavailable" or "Broken" is received while the battery voltage is in the low (between 6 V and 9 V) condition, and when intending to perform another self-diagnosis operation to record the DTC history, always start the procedure after checking that the battery voltage is within the specified normal value.
  1. CHECK E-SUS CONTROL UNIT SIGNAL 

    With CONSULT 

    1. Start the engine.
      CAUTION: Always hold the vehicle stopped.
    2. Select "DATA MONITOR" of "E-SUS".
    3. Check the value of "IGN" on "DATA MONITOR" screen.

      Is the value in "DATA MONITOR" "between 6 V and 9 V" or more? 

      YES: GO TO 2.

      NO: Perform the diagnosis for the charging system. Refer to "SYMPTOM TABLE ".

  2. DTC REPRODUCTION PROCEDURE 

    With CONSULT 

    Perform "E-SUS" self-diagnosis.

    Is DTC "C1D03" detected? 

    YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

    NO: INSPECTION END

scientia non olet · About Mike's Workshop Manuals