Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> FX37 Base, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P1089 To P2138 >> DTC P1091: VVEL Actuator Motor Relay >> Component Inspection

Component Inspection

  1. CHECK VVEL ACTUATOR MOTOR RELAY 
    1. Turn ignition switch OFF.
    2. Remove VVEL actuator motor relay.
    3. Check the continuity between VVEL actuator motor relay terminals under the following conditions.
      Terminal Condition Continuity
      3 and 5 12 V direct current supply between terminals 1 and 2 Existed
      No current supply Not existed
      Fig 1: Checking Continuity Between VVEL Actuator Motor Relay Terminals
      G09000922Courtesy of NISSAN NORTH AMERICA, INC.

      Is the inspection result normal? 

      YES: INSPECTION END

      NO: Replace VVEL actuator motor relay. Refer to "COMPONENT PARTS LOCATION ".

scientia non olet · About Mike's Workshop Manuals