Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2013 >> EX37 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine Mechanical) >> Disassembly And Assembly >> How To Select Piston And Bearing >> Piston >> Piston Selection Table

Piston Selection Table

WARNING: This page is about a different car, the 2008 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER BORE INNER DIAMETER

Unit: mm (in)
Grade 1 2 3
Cylinder bore inner diameter 95.500 - 95.510 (3.7598 - 3.7602) 95.510 - 95.520 (3.7602 - 3.7606) 95.520 - 95.530 (3.7606 - 3.7610)
Piston skirt diameter 95.480 - 95.490 (3.7590 - 3.7594) 95.490 - 95.500 (3.7594 - 3.7598) 95.500 - 95.510 (3.7598 - 3.7602)
NOTE:
  • Piston is available together with piston pin as assembly.
  • Piston pin (piston pin hole) grade is provided only for the parts installed at the plant. For service parts, no piston pin grades can be selected. (Only "0" grade is available.)
  • No second grade mark is available on piston.
scientia non olet · About Mike's Workshop Manuals