DTC Detection Logic
WARNING: This page is about a different car, the 2013 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If DTC P2014, P2016, P2017 or P2018 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to
"ON BOARD DIAGNOSIS LOGIC ".
| DTC No. | CONSULT screen terms (Trouble diagnosis content) | DTC detecting condition | Possible cause |
|---|---|---|---|
| P2014 | IN/MANIFOLD RUNNER POS SEN B1 (Intake manifold runner position sensor/switch circuit bank 1) | An excessively low voltage from the sensor is sent to ECM. |
|
| P2016 | IN/MANIFOLD RUNNER POS SEN B1 (Intake manifold runner position sensor/switch circuit low bank 1) | ||
| P2017 | IN/MANIFOLD RUNNER POS SEN B1 (Intake manifold runner position sensor/switch circuit high bank 1) | An excessively high voltage from the sensor is sent to ECM. | |
| P2018 | IN/MANIFOLD RUNNER POS SEN B1 (Intake manifold runner position sensor/switch circuit intermittent bank 1) |