Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (Engine Control System - DTCS U0101 To P0183) >> DTC P010A: Manifold Absolute Pressure Sensor >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2013 Infiniti M56. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC P010A is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to "DTC LOGIC ".
DTC No. Trouble diagnosis name (Trouble diagnosis content) DTC detecting condition Possible cause
P010A ABSL PRES SEN/CIRC [Manifold absolute pressure (MAP) sensor circuit]
  • An excessively low voltage from the sensor is sent to ECM.
  • An excessively high voltage from the sensor is sent to ECM.
  • Harness or connectors (Manifold absolute pressure sensor circuit is shorted.)
  • Manifold absolute pressure sensor
scientia non olet · About Mike's Workshop Manuals