Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Drive Mode System) >> Removal And Installation >> Drive Mode Select Switch >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2013 Infiniti M56 and 2013 Infiniti M37. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the console finisher assembly from the center console assembly. Refer to "EXPLODED VIEW ".
  2. Remove the console indicator finisher from the console finisher assembly. Refer to "DISASSEMBLY AND ASSEMBLY ".
  3. Remove the drive mode select switch from the switch panel with a flat-blade screwdriver.
scientia non olet · About Mike's Workshop Manuals