DTC Confirmation Procedure
- PRECONDITIONING
If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn the ignition switch OFF and wait at least 10 seconds before conducting the next test.
: GO TO 2.
- CHECK DTC DETECTION
With CONSULT
- Start engine and drive vehicle at approx. 30 km/h (19 MPH) or more for approx. 1 minute.
- Perform self-diagnosis for "ABS".
Is DTC "C1115" detected?
YES: Proceed to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END