Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Infiniti >> 2012 >> M37 Base >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Warning Chime System >> DTC/Circuit Diagnosis >> Meter Buzzer Circuit >> Component Function Check

Component Function Check

  1. CHECK OPERATION OF METER BUZZER 
    1. Select "BUZZER" of "BCM" on CONSULT.
    2. Perform "LIGHT WARN ALM" of "Active Test".

      Does meter buzzer beep? 

      YES: INSPECTION END

      NO: GO TO 2.

  2. CHECK COMBINATION METER INPUT SIGNAL 

    Select the "Data Monitor" for the "METER/M&A" and check the "BUZZER" monitor value.

    BUZZER

    Under the condition of buzzer input: On

    Except above: Off

    Is the inspection result normal? 

    YES: Replace combination meter. Refer to "REMOVAL AND INSTALLATION ".

    NO: Replace BCM. Refer to "REMOVAL AND INSTALLATION ".

scientia non olet · About Mike's Workshop Manuals