DTC Confirmation Procedure

If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

: GO TO 2.

◦ WITH CONSULT

1. Start the engine.
2. Select "SLCT LVR POSI" and "VHCL/S SE-A/T" in "Data Monitor" in "TRANSMISSION".
3. Drive vehicle and maintain the following conditions for 5 seconds or more.

   SLCT LVR POSI: D

   VHCL/S SE-A/T: 5 km/h (3 MPH) or more

4. Check DTC.

   Is "P1705" detected? 

   YES: Go to "DIAGNOSIS PROCEDURE ".

   NO: INSPECTION END